کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1271865 | 1497478 | 2014 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A performance study of methanol steam reforming in an A-type microchannel reactor A performance study of methanol steam reforming in an A-type microchannel reactor](/preview/png/1271865.png)
• The methanol steam reforming (MSR) in an A-type microchannel reactor was studied.
• The species distributions in A-type are more uniform than those in Z-type.
• The conversion rate and pressure drop of A-type are better than those of Z-type.
The methanol steam reforming (MSR) performance in a microchannel reactor is directly related to the flow pattern design of the microchannel reactor. Hydrogen production improvements can be achieved by optimal design of the flow pattern. In this study, an A-type microchannel reactor with a flow pattern design of one inlet and two outlets was applied to conduct the MSR for hydrogen production. The MSR performance of the A-type microchannel reactor was investigated through numerical analysis by establishing a three-dimensional simulation model and compared with that of the conventional Z-type microchannel reactor. Experiments were also conducted to test the MSR performance and validate the accuracy of the simulation model. The results showed that compared with the conventional Z-type microchannel reactor, the species distributions in the A-type microchannel reactor were more homogeneous. In addition, compared with the Z-type microchannel reactor, the A-type microchannel reactor was shown to effectively increase the methanol conversion rate by up to 8% and decrease the pressure drop by about 20%, regardless of a slightly higher CO mole fraction. It was also noted that with various quantities of microchannels and microchannel cross sections, the A-type microchannel reactor was still more competitive in terms of a higher methanol conversion rate and a lower pressure drop.
Journal: International Journal of Hydrogen Energy - Volume 39, Issue 31, 22 October 2014, Pages 17690–17701