Development of durable copper catalyst for hydrogen production by high temperature methanol steam reforming

• Addition of Y2O3 to Cu/ZnO/ZrO2/In2O3 increases dispersion of the coprecipitate.
• The high dispersion of Cu/ZnO/ZrO2/Y2O3/In2O3 causes high initial activity.
• Cu/ZnO/ZrO2/Y2O3/In2O3 catalyst supported on a ZrO2 has been prepared.
• Cu sintering in Cu/ZnO/ZrO2/Y2O3/In2O3 is suppressed on the ZrO2 support.
• The small Cu particles stabilized on the ZrO2 support are active and durable.

Highly durable catalyst for high temperature methanol steam reforming is required for a compact hydrogen processor. Deactivation of a coprecipitated Cu/ZnO/ZrO2 catalyst modified with In2O3 is very gradual even in the high temperature methanol steam reforming mainly at 500 °C, but the initial activity is considerably low. Addition of Y2O3 to Cu/ZnO/ZrO2/In2O3 increases its initial activity due to the higher Cu surface amount, while the activity comes gradually close to that for the catalyst without Y2O3 during the reaction. Coprecipitation of Cu/ZnO/ZrO2/Y2O3/In2O3 on a zirconia support triply increases the overall activity by keeping the durability while the amount of the coprecipitated portion is a half of that without the support. On the composite catalyst, sintering of Cu particles is suppressed. The surface Cu amount is similar to that without the support, but the Cu surface activity is much higher probably because of the small Cu particle size.

Figure optionsDownload as PowerPoint slide