Simultaneous thermophilic hydrogen production and phenol removal from palm oil mill effluent by Thermoanaerobacterium-rich sludge

Thermoanaerobacterium-rich sludge was used for hydrogen production and phenol removal from palm oil mill effluent (POME) in the presence of phenol concentration of 100–1000 mg/L. Thermoanaerobacterium-rich sludge yielded the most hydrogen of 4.2 L H2/L-POME with 65% phenol removal efficiency at 400 mg/L phenol. Butyric acid and acetic acid were the main metabolites. The effects of oil palm ash, NH4NO3 and iron concentration (Fe2+) on hydrogen production and phenol removal efficiency from POME by Thermoanaerobacterium-rich sludge was investigated using response surface methodology (RSM). The RSM results indicated that the presence of 0.2 g Fe2+/L, 0.3 g/L NH4NO3 and 20 g/L oil palm ash in POME could improved phenol removal efficiency, with predicted hydrogen production and phenol removal efficiency of 3.45 L H2/L-POME and 93%, respectively. In a confirmation experiment under optimized conditions highly reproducible results were obtained, with hydrogen production and phenol removal efficiency of 3.43 ± 0.12 L H2/L-POME and 92 ± 1.5%, respectively. Simultaneous hydrogen production and phenol removal efficiency in continuous stirred tank reactor at hydraulic retention time (HRT) of 1 and 2 days were 4.0 L H2/L-POME with 85% and 4.2 L H2/L-POME with 92%, respectively. Phenol degrading Thermoanaerobacterium-rich sludge comprised of Thermoanaerobacterium thermosaccharolyticum, Thermoanaerobacterium aciditolerans, Desulfotomaculum sp., Bacillus coagulans and Clostridium uzonii. Phenol degrading Thermoanaerobacterium-rich sludge has great potential to harvest hydrogen from phenol-containing wastewater.

► Thermoanaerobacterium-rich sludge produced 4.2 L H2/L-POME.
► It has phenol removal efficiency of 92% from POME.
► Main soluble metabolites were butyric acid and acetic acid.
► Sludge dominated by T. thermosaccharolyticum, T. aciditolerans and C. uzonii.