La-doped SrTiO3 interconnect materials for anode-supported flat-tubular solid oxide fuel cells

An interconnect layer in an anode-supported flat-tubular solid oxide fuel cell connects electrically unit cells and separates fuel from oxidant in the adjoining cells. Nano-sized La-doped SrTiO3 for the interconnect is synthesized in this study by the Pechini method using citric acid. The materials with stoichiometric and Sr-deficient compositions are prepared and sintered in an oxidizing atmosphere. The synthesized fine powders exhibit high sinterability, leading to near-full densification. The Sr deficiency plays a crucial role in mechanical, electrical and thermal expansion properties. The interconnect is coated using the synthesized powder on a porous flat-tubular anode support by a screen printing process. The thin and dense layer is obtained after co-sintering in air, and the interconnect/anode interface remains intact upon reduction.

► Nano-sized La-doped SrTiO3 as interconnect materials for flat-tubular SOFCs.
► The Pechini-derived powders exhibit high sinterability.
► The Sr deficiency modifies mechanical, electrical and thermal expansion properties.
► A thin and dense layer is obtained after co-sintering.
► The interconnect/anode interface remains intact upon reduction.