Experimental and numerical study on laminar burning characteristics of premixed methane–hydrogen–air flames

An experimental and numerical study on laminar burning characteristics of the premixed methane–hydrogen–air flames was conducted at room temperature and atmospheric pressure. The unstretched laminar burning velocity and the Markstein length were obtained over a wide range of equivalence ratios and hydrogen fractions. Moreover, for further understanding of the effect of hydrogen addition on the laminar burning velocity, the sensitivity analysis and flame structure were performed. The results show that the unstretched laminar burning velocity is increased, and the peak value of the unstretched laminar burning velocity shifts to the richer mixture side with the increase of hydrogen fraction. Three regimes are identified depending on the hydrogen fraction in the fuel blend. They are: the methane-dominated combustion regime where hydrogen fraction is less than 60%; the transition regime where hydrogen fraction is between 60% and 80%; and the methane-inhibited hydrogen combustion regime where hydrogen fraction is larger than 80%. In both the methane-dominated combustion regime and the methane-inhibited hydrogen combustion regime, the laminar burning velocity increases linearly with the increase of hydrogen fraction. However, in the transition regime, the laminar burning velocity increases exponentially with the increase of hydrogen fraction in the fuel blends. The Markstein length is increased with the increase of equivalence ratio and is decreased with the increase of hydrogen fraction. Enhancement of chemical reaction with hydrogen addition is regarded as the increase of H, O and OH radical mole fractions in the flame. Strong correlation is found between the burning velocity and the maximum radical concentrations of H and OH in the reaction zone of the premixed flames.