Balancing dimensional stability and performance of proton exchange membrane using hydrophilic nanofibers as the supports

In this work, we developed a novel composite membrane by anchoring perfluorosulfonic acid into the hydrophilic poly(lactic-co-glycolic acid) (PLGA) nanofibrous network which was synthesized by electrospinning method. It was clear that the PLGA/Nafion composite membranes possessed high Nafion loading, excellent dimensional stability and proton transport capacity. When the humidity of the membrane changed from soaking in water to 25 RH% at 90 °C, the PLGA fiber network effectively controlled the swelling of Nafion resin and reduced the humidity-generated shrinkage stress from 2.2 MPa (Nafion211 membranes) to 0.5 MPa (PLGA/Nafion composite membranes). The proportion of humidity-induced stress to the yield strength was also reduced to 4.4%, in comparison to 21.2% of that of Nafion211 membrane. The area proton conductivity of the PLGA/Nafion composite membrane achieved 48.2 S cm−2, compared with 36.0 S cm−2 of Nafion211 membranes in the same condition. The excellent proton transport capacity greatly improved the performance of fuel cell assembled with PLGA/Nafion composite membranes and effectively reduced the dynamic response time from 22 s (Nafion211 membranes) to 7 s (PLGA/Nafion composite membranes).

Proton exchange membrane with high dimensional stability, good proton conductivity and fast dynamic response was developed by anchoring perfluorosulfonic acid into the hydrophilic poly(lactic-co-glycolic acid) (PLGA) nanofibrous network.Figure optionsDownload as PowerPoint slideHighlights
► Stable proton exchange membrane.
► hydrophilic poly(lactic-co-glycolic acid) nanofibers as membrane supports.
► Low humidity-induced stress to the yield strength.
► High physical stability.