Preparation and characterization of Co–Ru/TiO2/MWCNTs electrocatalysts in PEM hydrogen electrolyzer

The subject of this study is preparation and characterization of hypo–hyper d-electrocatalysts with reduced amount of precious metals aimed for water electrolysis. The studied electrocatalysts contain 10% mixed metallic phase (Co:Ru = 1:1 wt., Co:Ru = 4:1 wt. and Co:Ru:Pt = 4:0.5:0.5 wt.), 18% TiO2 as a crystalline anatase deposited on multiwalled carbon nanotubes (MWCNTs). Previously, MWCNTs were activated in 28% nitric acid. As a reference electrocatalyst for hydrogen evolution reaction, corresponding electrocatalysts with pure Pt metallic phase and mixed CoPt (Co:Pt = 1:1 wt.) metallic phase were prepared. Also, as a reference electrocatalyst for oxygen evolution reaction, electrocatalyst with pure Ru metallic phase was prepared.The prepared electrocatalysts were structurally characterized by means of XPS, XRD, TEM, SEM and FTIR analysis.Electrochemical characterization was performed by means of cyclic voltammetry and potentiodynamic method in the PEM hydrogen electrolyzer. The range of the catalytic activity for hydrogen evolution of studied electrocatalysts was the following: CoRuPt (4:0.5:0.5) > CoPt (1:1) > Pt > CoRu (1:1) > CoRu (4:1). The order of the catalytic activity for oxygen evolution was the following: CoRu (1:1) > Ru > CoRu (4:1) > Pt > CoRuPt (4:0.5:0.5) > CoPt (1:1).

► Electrocatalysts with reduced amount of precious metals aimed for water electrolysis were studied.
► Catalyst containing CoRuPt (4:0.5:0.5, wt.) has shown the best catalytic activity for HER.
► Electrocatalyst containing CoRu (1:1, wt.) has shown the best catalytic activity for OER.