Parametric study of the decomposition of methane using a NiCu/Al2O3 catalyst in a fluidized bed reactor

CO2-free production of hydrogen via catalytic decomposition of methane (CDM) was studied in a fluidized bed reactor (FBR) using a NiCu/Al2O3 catalyst. A parametric study of the effects of some process variables, including catalyst particle size, reaction temperature, space velocity and the ratio of gas flow velocity to the minimum fluidization velocity (uo/umf), was undertaken. A mean particle size of 150 μm allows optimization of results in terms of hydrogen production without agglomeration problems. The operating conditions strongly affect the catalyst performance: hydrogen production was enhanced by increasing operating temperature and lowering space velocity. However, increases in operating temperature, space velocity and the ratio uo/umf provoked increases in the catalyst deactivation rate. At 700 °C, carbon was deposited as carbon nanofibers, while higher temperatures promoted the formation of encapsulating carbon, which led to rapid catalyst deactivation.