کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1281528 | 1497649 | 2008 | 10 صفحه PDF | دانلود رایگان |
Experiments were conducted on two different cathode air cooled high temperature PEM (HTPEM) fuel cell stacks; a 30 cell 400 W prototype stack using two bipolar plates per cell, and a 65 cell 1 kW commercial stack using one bipolar plate per cell. The work seeks to examine the use of different heating strategies and find a strategy suited for fast start-up of the HTPEM fuel cell stacks. Fast start-up of these high temperature systems enables use in a wide range of applications, such as automotive and auxiliary power units, where immediate system response is needed. The development of a dynamic model to simulate the temperature development of a fuel cell stack during heating can be used for assistance in system and control design. The heating strategies analyzed and tested reduced the start-up time of one of the fuel cell stacks from 1 h to about 6 min.
Journal: International Journal of Hydrogen Energy - Volume 33, Issue 17, September 2008, Pages 4655–4664