کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1286981 | 973209 | 2006 | 6 صفحه PDF | دانلود رایگان |

An anode-supported solid oxide fuel cell (SOFC), consisting of a dense 10 μm Gd0.1Ce0.9O1.95 (GDC) electrolyte, a porous Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) cathode and a porous Ni–GDC cermet anode, is successfully assembled and electrochemically characterized. With humidified (3% water vapour) hydrogen as the fuel and air as the oxidant, the cell exhibits open-circuit voltages of 0.903 and 0.984 V when operating at 600 and 500 °C, respectively. The cell produces peak power densities of 1329, 863, 454, 208 and 83 mW cm−2 at 600, 550, 500, 450 and 400 °C, respectively. These results are impressive and demonstrate the potential of BSCF for use as the cathode material in new-generation SOFCs with GDC as the electrolyte. In addition, the sustained performance at temperatures below 600 °C warrants commercial exploitation of this SOFC in stationary and mobile applications.
Journal: Journal of Power Sources - Volume 161, Issue 1, 20 October 2006, Pages 123–128