Conductivity and hydration of sulfonated polyethersulfone in the range 70–120 °C: Effect of temperature and relative humidity cycling

Proton conductivity and hydration of sulfonated polyethersulfone (SPES) membranes, with ion exchange capacity of 1.31 meq g−1, is determined under different conditions of temperature, in the range 70–120 °C, and relative humidity (RH) in the range 50–90%. Conductivity measurements are performed by the impedance technique, and the impedance data are analyzed on the basis of a simple equivalent circuit in order to compare the evolution of the membrane conductivity with that of the electrical capacitance of the electrode–electrolyte interface during heating and cooling runs.Temperature cycling at constant RH, as well as RH cycling at constant temperature, give rise to hydration hysteresis and to the concomitant conductivity hysteresis. The highest conductivity (4.5·10−2 S cm−1) is measured at 100 °C–90% RH with 8.4 water molecules per sulfonic group. The hysteresis associated with temperature cycling is avoided by filling SPES with zirconium phosphate which makes hydration easier at low temperature.

► Conductivity and hydration of SPES from 70 to 120 °C at 75% relative humidity.
► Conductivity and hydration of SPES as a function relative humidity at 100 °C.
► Influence of temperature and relative humidity cycling on conductivity and hydration.