A graphite-coated carbon fiber epoxy composite bipolar plate for polymer electrolyte membrane fuel cell

A PEMFC (polymer electrolyte membrane fuel cell or proton exchange membrane fuel cell) stack is composed of GDLs (gas diffusion layers), MEAs (membrane electrode assemblies), and bipolar plates. One of the important functions of bipolar plates is to collect and conduct the current from cell to cell, which requires low electrical bulk and interfacial resistances. For a carbon fiber epoxy composite bipolar plate, the interfacial resistance is usually much larger than the bulk resistance due to the resin-rich layer on the composite surface.In this study, a thin graphite layer is coated on the carbon/epoxy composite bipolar plate to decrease the interfacial contact resistance between the bipolar plate and the GDL. The total electrical resistance in the through-thickness direction of the bipolar plate is measured with respect to the thickness of the graphite coating layer, and the ratio of the bulk resistance to the interfacial contact resistance is estimated using the measured data. From the experiment, it is found that the graphite coating on the carbon/epoxy composite bipolar plate has 10% and 4% of the total electrical and interfacial contact resistances of the conventional carbon/epoxy composite bipolar plate, respectively, when the graphite coating thickness is 50 μm.

► A thin graphite layer in the range of 2–50μm is coated on a carbon fiber epoxy composite by using a graphite foil and the laminator.
► The graphite-coated carbon/epoxy composite bipolar plate has 10% of the total electrical resistance of the conventional carbon/epoxy composite bipolar plate.
► The interfacial contact resistance of the graphite-coated carbon/epoxy composite bipolar plate is 4% of the conventional one.