Comparative study on the performance of pyrolyzed and plasma-treated iron(II) phthalocyanine-based catalysts for oxygen reduction in pH neutral electrolyte solutions

The performance of pyrolyzed and plasma-treated non-precious catalysts for the oxygen reduction is discussed in the light of their application in microbial fuel cells. An Ar-radio frequency (RF) plasma treatment is applied to enhance the electrochemical activity of iron(II) phthalocyanine (FePc)-based catalysts. The electrochemical properties of the catalysts are analyzed by galvanodynamic linear sweep voltammetry and chronoamperometric experiments. Surface elemental analysis of the catalysts is examined by means of X-ray photoelectron spectroscopy (XPS). The influence of plasma power and treatment time on the elemental surface concentration and performance of the catalysts is investigated. The electrochemical activity, expressed in terms of the current density at 0 V vs. Ag/AgCl, is up to 40% higher for the plasma-treated samples than for pyrolyzed ones. It is found that optimal treatment time was 30 min and optimal plasma power was 150 W for the best electroactivity of FePc-based catalysts. From the results of XPS data, it is revealed that Ar-plasma treatment of the catalysts leads to an increase in the oxygen and nitrogen concentration on the catalysts surface. A correlation is found between the activity and surface concentration of oxygen and nitrogen on the catalysts’ surface.