Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cells

A physical vapor deposition (PVD) TiN coating has been used to increase the corrosion resistance of two stainless steel materials for bipolar plate application in proton exchange membrane fuel cells (PEMFCs). Our earlier studies had shown that a TiN coating on SS410 and SS316L increased the corrosion resistance of SS410 and SS316L significantly. In this study, we examine how the substrate affects the corrosion of TiN-coated stainless steel in the simulated anode and cathode environments. Potentiodynamic and contact resistance test results show that the polarization resistance and contact resistance of TiN-coated SS410 and TiN-coated SS316L are almost the same. However, in the simulated anode condition, the corrosion current density of TiN-coated SS410 is positive and the corrosion current density of TiN-coated SS316L is negative. Inductively coupled plasma optical emission spectrometry (ICP-OES) test results also show that the metal ion concentration is much higher for TiN-coated SS410 at the anode side. At the cathode side, the potentiostatic and ICP-OES tests show that the corrosion of TiN-coated SS410 and TiN-coated SS316L are in the same range. Therefore, the substrate has an effect on corrosion in the simulated anode working conditions of PEMFCs. In order to be the suitable bipolar plate materials, both the coating and substrate need to have a higher corrosion resistance.