کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1290226 | 973320 | 2008 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Performance of laboratory polymer electrolyte membrane hydrogen generator with sputtered iridium oxide anode Performance of laboratory polymer electrolyte membrane hydrogen generator with sputtered iridium oxide anode](/preview/png/1290226.png)
The continuous improvement of the anode materials constitutes a major challenge for the future commercial use of polymer electrolyte membranes (PEM) electrolyzers for hydrogen production. In accordance to this direction, iridium/titanium films deposited directly on carbon substrates via magnetron sputtering are operated as electrodes for the oxygen evolution reaction interfaced with Nafion 115 electrolyte in a laboratory single cell PEM hydrogen generator. The anode with 0.2 mg cm−2 Ir catalyst loading was electrochemically activated by cycling its potential value between 0 and 1.2 V (vs. RHE). The water electrolysis cell was operated at 90 °C with current density 1 A cm−2 at 1.51 V without the ohmic contribution. The corresponding current density per mgr of Ir catalyst is 5 A mg−1. The achieved high efficiency is combined with sufficient electrode stability since the oxidation of the carbon substrate during the anodic polarization is almost negligible.
Journal: Journal of Power Sources - Volume 185, Issue 2, 1 December 2008, Pages 1073–1078