Gas–liquid two-phase flow patterns in parallel channels for fuel cells

Two-phase flow in horizontal parallel channels has been experimentally investigated under fuel cell related operating conditions. Pronounced hysteresis is observed in the pressure drop versus flow characteristic curve when starting from either flooded or dry conditions. When gas is introduced into channels initially filled with water (flooded initial condition), both gas and liquid tend to flow predominantly in one channel at low gas or liquid flow velocities. As the gas flow velocity increases, even distribution of gas and liquid flow in both channels is observed, accompanied with a sudden decrease in the pressure drop. On the other hand, even gas and liquid flow distribution between both channels is found at comparatively lower gas flow velocities when starting with dry-gas flow conditions with liquid introduced into channels filled with gas (stratified flow regime). The flow regimes of this system are visualized in plots of the pressure drop against gas and liquid flow velocities. However, this phenomenon tends to vanish at high gas and liquid flow velocities, suggesting that high gas and liquid flow velocities are required to ensure even flow distribution in parallel channels. The hysteresis points appear at the same level of the pressure drop, reflecting intrinsic characteristics of the parallel channels used in this study. These results have important implications for PEM fuel cell operational strategies. In order to avoid reactant mal-distribution in parallel flow channels in the flow field in the two-phase flow regime, fuel cells should be operated at sufficiently high gas flow velocities.