کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1295418 | 1498400 | 2006 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Active parts for CH4 decomposition and electrochemical oxidation at metal/oxide interfaces by isotope labeling-secondary ion mass spectrometry Active parts for CH4 decomposition and electrochemical oxidation at metal/oxide interfaces by isotope labeling-secondary ion mass spectrometry](/preview/png/1295418.png)
Active parts for CH4 decomposition and electrochemical oxidation of reformed gases were investigated at the well defined Ni-mesh/oxide interfaces in μm level. The effective reaction areas were determined by isotope labeling technique under the mixture of CH4, D2O, and 18O2 at 1073 K. A deposition of carbon preferentially occurred on the Ni-mesh surface on Y2O3-stabilized ZrO2 (YSZ) and Sm2O3-doped CeO2 (SDC) electrolyte oxides. A slight reduction of carbon deposition was observed on SDC substrate under non-polarized condition. The electronic and structural properties changes of Ni were observed by XANES/EXAFS analysis. By anodic polarization, a significant reduction of deposited carbon was observed on Ni-mesh surface in Ni-mesh/YSZ and Ni-mesh/SDC samples. Oxygen spill over can be effective for eliminating the deposited carbon on the Ni-mesh. Hydrogen and isotope oxygen concentration (18O2) on the Ni-mesh was changed by the oxide substrates under anodic polarization.
Journal: Solid State Ionics - Volume 177, Issues 35–36, 30 November 2006, Pages 3179–3185