XRD studies of UV-irradiated chitin based polyurethane elastomers

Chitin based polyurethane (PU) elastomers constituted on 4,4´-diphenylmethane diisocyanate (MDI), poly(ε-caprolactone) (PCL) and extended with blends of chitin/1,4-butane diol were synthesized via two step polymerization technique. The synthesized samples were irradiated for 50, 100 and 200 h in an UV exposure chamber as such the spectral distribution of the light is good match for terrestrial solar radiation. The crystalline behavior of the irradiated PU samples were investigated by X-ray diffraction (XRD), differential scanning calorimetery (DSC) and dynamic mechanical thermal analysis (DMTA) techniques. The effect of irradiation time and chitin contents on crystallinity were studied and investigated. The maximum decrease in the crystalline behavior of samples after irradiation observed by XRD, DSC and tan δ peaks were found for the PU samples extended with lower contents of chitin (chitin/BDO; 0/100). In comparison with irradiation times the 200 h irradiation showed maximum change in the crystalline behavior.