Comparison of electrical properties between multi-walled carbon nanotube and graphene nanosheet/high density polyethylene composites with a segregated network structure

Multi-walled carbon nanotube (MWCNT)/high density polyethylene (HDPE) and graphene nanosheets (GNS)/HDPE composites with a segregated network structure were prepared by alcohol-assisted dispersion and hot-pressing. Instead of uniform dispersion in polymer matrix, MWCNTs and GNSs distributed along specific paths and formed a segregated conductive network, which results in a low electrical percolation threshold of the composites. The electrical properties of the GNS/HDPE and MWCNT/HDPE composites were comparatively studied, it was found that the percolation threshold of the GNS/HDPE composites (1 vol.%) was much higher than that of the MWCNT/HDPE composites (0.15 vol.%), and the MWCNT/HDPE composite shows higher electrical conductivity than GNS/HDPE composite at the same filler content. According to the values of critical exponent, t, the two composites may have different electrical conduction mechanisms: MWCNT/HDPE composite represents a three-dimensional conductive system, while the GNS/HDPE composite represents a two-dimensional conductive system. The improving effect of GNSs as conducting fillers on the electrical conductivity of their composites is far lower than theoretically expected.