Effects of surface chemistry on the reactive adsorption of hydrogen cyanide on activated carbons

Two activated carbons of different origins were modified by heating at 950 °C either with or without previous urea impregnation. The treatment causes changes in surface chemistry and porosity. The materials obtained were used as adsorbents for hydrogen cyanide in dry air at ambient conditions. The samples before and after adsorption were characterized using nitrogen adsorption, potentiometric titration, elemental analysis and thermal analysis. On selected samples extraction was carried out to identify surface reaction products soluble in alcohols. The results indicated differences in the amount adsorbed and the products of surface reactions on specific surface features. The presence of nitrogen incorporated in the carbon matrix leads to an enhanced performance owing to the basic environment and the ability of the surface to activate oxygen. These lead to complex surface reactions in which the derivatives of hydrogen cyanide form oxamide, and are incorporated in the carbon matrix, or are deposited as the bulky insoluble polymers of paracyanogen on the surface. The reactions mainly occur in pores with sizes between 10 and 20 Å where the functional groups can be present and HCN, or its derivatives, and water can take part in the reactions.