Tubular structured ordered mesoporous carbon as an efficient sorbent for the removal of dyes from aqueous solutions

Tubular structured ordered mesoporous carbon CMK-5 was investigated for the adsorption of the industrial dyes reactive blue 19, acid red 57 and fuchsin basic in aqueous solutions at room temperature. It was found that CMK-5 exhibits an ultrahigh adsorption rate and superior adsorption capacities for these dyes. Its maximum adsorption capacities for reactive blue 19, acid red 57 and fuchsin basic were 733, 1131 and 1403 mg g−1, respectively, and significantly greater than other literature reported results on porous carbons. Following adsorption of reactive blue 19, CMK-5 carbon could be regenerated by either ethanol extraction or thermal annealing at 600 °C, reaching ∼51% and ∼77%, respectively of the adsorption capacity of the original carbon. For comparison, ordered mesoporous carbon CMK-3 (rod structure), polymer based disordered mesoporous carbon, and steam and CO2 activated commercial coconut carbons were investigated for the adsorption of reactive blue 19. The fast adsorption rate of CMK-5 carbon is due to its unique properties of tubular mesostructure, bimodal mesopore system and high surface area. In the case of requiring emergency removal of large amount of dyes in aqueous solution, CMK-5 would be an ideal choice.