Temperature dependence of electrical resistivity for carbon black filled ultra-high molecular weight polyethylene composites prepared by hot compaction

In this article, the temperature dependence of electrical resistivity is studied for carbon black (CB)/ultra-high molecular weight polyethylene (UHMWPE) composites. A new positive temperature coefficient (PTC) material with a very low percolation threshold is produced by the hot compaction method. The very low percolation threshold can be attributed to the segregation of CB in the interfacial regions of UHMWPE particles. The percolation threshold decreases with the increase of the molecular weight of UHMWPE, and with the decrease of the particle size of CB. For CB filled lower molecular weight UHMWPE (145M) composites, the PTC temperature, at which a sharp increase in the resistivity of the composite occurs, decreases with the increase of CB size. However, for a higher molecular weight UHMWPE (630M) filled with CB, the second PTC effect is observed and the negative temperature coefficient (NTC) effect is eliminated. A mechanism is proposed to explain these phenomena based on the optical microscopy and TEM observations. It can be concluded that the degree of the intermixing between CB and UHMWPE particles plays an important role in determining the electrical properties of the composites.