Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering

• A novel porous Mg was produced by a fiber deposition hot pressing technology.
• The porous Mg has a 3D interconnected network structure with a porosity of 33-54%.
• Mechanical properties of the porous Mg are comparable to those of cancellous bone.

Porous magnesium has been recently recognized as a biodegradable metal for bone substitute applications. A novel porous Mg scaffold with three-dimensional (3D) interconnected pores and with a porosity of 33–54% was produced by the fiber deposition hot pressing (FDHP) technology. The microstructure and morphologies of the porous Mg scaffold were characterized by scanning electron microscopy (SEM), and the effects of porosities on the microstructure and mechanical properties of the porous Mg were investigated. Experimental results indicate that the measured Young's modulus and compressive strength of the Mg scaffold are ranged in 0.10–0.37 GPa, and 11.1–30.3 MPa, respectively, which are fairly comparable to those of cancellous bone. Such a porous Mg scaffold having a 3D interconnected network structure has the potential to be used in bone tissue engineering.

Figure optionsDownload as PowerPoint slide