High-sensitivity humidity sensor based on SnO2 nanoparticles synthesized by microwave irradiation method

Tin oxide hexagonal-shaped nanodiscs (SnO) and spherical nanoparticles (SnO2) have been prepared by using a simple household microwave irradiation method with an operating frequency of 2.45 GHz. This technique permits us to produce gram quantity of homogeneous nanoparticles in just 10 min. The crystallite size was evaluated from powder X-ray diffraction (XRD) studies and was in the 20 to 25 nm range. Transmission electron microscopy (TEM) analysis showed that the as prepared SnO form as hexagonal-shaped nanodiscs and upon subsequent annealing at 500 °C for 5 h in air, the SnO gets converted to spherical-shaped nanoparticles of SnO2. The SnO2 sample shows good sensitivity towards the relative humidity. The calculated response and recovery time were found to be 32 s and 25 s respectively. These results indicate promising applications of SnO2 nanoparticles in a highly sensitive environmental monitoring and humidity controlled electronic devices. The samples were further subjected to thermal analyses (TG–DTA) and UV–VIS diffusion reflectance spectroscopy (DRS) studies.