Synthesis and characterisation of styrene butadiene styrene-g-acrylic acid for potential use in biomedical applications

The work undertaken investigates the mechanical and thermal properties of styrene butadiene styrene (SBS) grafted with acrylic acid (AA) for use as a potential biomedical material. SBS-g-AA was synthesised by UV polymerisation and analytical techniques such as differential scanning calorimetry (DSC), attenuated total reflectance infrared Fourier transform spectrometry (ATR-FTIR), dynamic mechanical thermal analysis (DMTA) and tensile tests were used to characterise the grafted copolymers. From the DSC analysis, the glass transitions of polystyrene (PS) and polybutadiene (PB) domains present in the SBS copolymer were detected at 67 °C and − 90 °C respectively. ATR-FTIR spectral analysis was used in conjunction with the DSC thermographs to analyse the grafted copolymers. The peak (1711 cm− 1 ) associated with CO stretching in poly acrylic acid was located at 1725 cm− 1 on the grafted SBS-g-AA copolymer which confirmed grafting took place. Mechanical testing was carried out to analyse the physical attributes of the grafted copolymers. It was found that a decrease in Young's modulus and stress at break occurred for SBS-g-AA copolymers which were soxhlet extracted using chloroform (washed). It was evident from the DMTA results that the glass transition values for each of the washed grafted samples increased, thus establishing that grafting had occurred onto the various butadiene segments along the SBS backbone. The results showed that the hydrophilic monomer was successfully grafted onto a hydrophobic polymer and the mechanical and thermal properties were in the useful range for biomedical applications.