کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1443834 | 988175 | 2008 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of poly-3-hexylthiophene/polyethylene oxide nanofibers using electrospinning
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
بیومتریال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
P3HT–PEO blend nanofibers were produced by electrospinning from chloroform solutions. A morphological study was carried out as a function of the processing parameters as well as the ratio between the two polymers. The fibers containing at least 60 wt.% of P3HT presented striated surfaces that could be explained by the alignment of the polymer domains along the fiber axis. The structural arrangement of the polymers was found to vary according to the polymers relative contents. The maximum electrical conductivity found for unaligned mats was 0.16 S/cm and increased to 0.3 S/cm when the nanofibers were aligned along a preferential direction.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Synthetic Metals - Volume 158, Issue 14, August 2008, Pages 577–584
Journal: Synthetic Metals - Volume 158, Issue 14, August 2008, Pages 577–584
نویسندگان
Alexis Laforgue, Lucie Robitaille,