کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1458812 | 989586 | 2016 | 8 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Experiment research on mix design and early mechanical performance of alkali-activated slag using response surface methodology (RSM) Experiment research on mix design and early mechanical performance of alkali-activated slag using response surface methodology (RSM)](/preview/png/1458812.png)
To enhance the quality of alkali-activated slag (AAS) materials, scientific and efficient mix design method is preferred. This paper presents an optimization of AAS materials using Response Surface Methodology (RSM). Three factors related to early strength such as modulus (n), concentration of alkali activator (CAA) and liquid–solid ratio (LSR) were investigated. Specimens with different mix ratios were prepared based on RSM design. The early mechanical performance was assessed, after 2 or 3 h of curing. Then response surface models were established and the effect law of each factor was systemically analyzed. The result shows that both n and CAA have a significant effect on the early strength, while LSR affects slightly. By adjusting the mix design parameters, the early performance of AAS can be effectively improved. This study verifies that RSM is efficient in the preparation of AAS and it can control the early strength of AAS accurately.
Journal: Ceramics International - Volume 42, Issue 10, 1 August 2016, Pages 11666–11673