Freestanding hematite nanofiber membrane for visible-light-responsive photocatalyst

Freestanding mesoporous hematite (α-Fe2O3) nanofiber membranes were successfully fabricated by sol–gel electrospinning process using ferratrane precursor for use as a high-performance material for visible-light-responsive photocatalyst. Non-porous nanofiber membranes spun on the heated collector at 300 °C were crystalline α-Fe2O3 phase. Upon calcination, pure mesoporous nanofiber membranes were obtained even at a low temperature of 400 °C. The photocatalytic membrane calcined at 400 °C showed the highest efficiency for methylene blue (MB) degradation under visible-light irradiation. The synergetic effects of higher surface area, pore volume and pore diameter promoted the photocatalytic efficiency for MB degradation under visible light. The utilization of photocatalyst in the form of membrane could not only solve the problems of catalyst separation and recovery, but also produce high photodegradation efficiency for both systems without and with hydrogen peroxide even at a catalyst loading as low as 0.04 g/L. No appreciable loss in photocatalytic activity was observed and structural integrity was retained, even after five cycles of photodegradation, which predicted the stability and reusability of these nanofiber membranes for practical use in environmental applications.