کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
146008 456356 2016 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Nitrogen removal in a two-chambered microbial fuel cell: Establishment of a nitrifying–denitrifying microbial community on an intermittent aerated cathode
ترجمه فارسی عنوان
حذف نیتروژن در یک سلول سوختی میکروبی دو طبقه: ایجاد یک جامعه میکروبی نیتروفیزاسیون بر روی یک کاتد هوادهی متناوب
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی


• Diffused ammonium is being mostly nitrified at the cathode compartment.
• Nitrosomonas sp. and Nitrobacter sp. were the main cathode’s nitrifying bacteria.
• Heterotrophic acetate-dependent denitrification from cathode biomass was confirmed.
• Intermittent aerated cathode established a nitrifying–denitrifying community.

A microbial fuel cell (MFC) was used to study nitrogen dynamics and its feasibility for high strength wastewater treatment. Intermittent aeration was applied on the cathode chamber accomplishing the establishment of a simultaneous nitrifying–denitrifying microbial community. A total of 30.4% of the N-NH4+ migrated through the ion exchange membrane being primarily nitrified at the cathode chamber. When intermittent aeration was applied in the cathode, denitrification also occurred achieving 17.8% of nitrate removal without acetate addition, and 41.2% with acetate addition. The microbial community analysis revealed that the nitrification process at the cathode chamber could be explained due to a high predominance of Nitrosomonas sp. as ammonia-oxidising bacteria and other Comamonadaceae phylotypes as potential denitrifiers. Parallel batch denitrification assays, carried out outside the MFC using the cathode effluent, confirmed the existence of heterotrophic denitrification processes with other well known denitrifying dominant phylotypes enrichment (Burkholderiadaceae, Comamonadaceae, Alcaligenaceae).

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering Journal - Volume 284, 15 January 2016, Pages 905–916
نویسندگان
, , , ,