کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1461523 | 989620 | 2014 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Interfacial reactions and joining characteristics of a Cu-Pd-V system filler alloy with Cf/SiC composite
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A novel composition of Cu-Pd-V filler alloy was designed for the joining of Cf/SiC composite. The filler alloy was fabricated into brazing foils with a thickness of 0.15 mm by a rolling process. The alloyâ²s wettability on the Cf/SiC composite was studied with the sessile drop method. After heating at 1473 K for 10 min the Cu-Pd-V filler alloy showed a low contact angle of 6° on the composite. A VC0.75 reaction band was formed at the surface of the Cf/SiC composite under the brazing condition of 1443 K /10 min, and the microstructure in the central part of the joint was composed of (Cu, Pd) solid solution and eutectic-like phase of Pd2Si+Cu3Pd. The interfacial reaction mechanism is discussed. The room-temperature three-point bend strength of Cf/SiC-Cf/SiC joints brazed with Cu-Pd-V filler alloy at 1443 K for 10 min is 128 MPa, and the joint strengths at temperatures of 873-1073 K are even higher than the room-temperature strength. The presence of refractory Pd2Si compounds within the joints should contribute to the stable high-temperature joint strengths.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 40, Issue 6, July 2014, Pages 7857-7863
Journal: Ceramics International - Volume 40, Issue 6, July 2014, Pages 7857-7863
نویسندگان
Hua-Ping Xiong, Bo Chen, Yu Pan, Wei Mao, Yao-Yong Cheng,