Fabrication and luminescence properties of one-dimensional ZnAl2O4 and ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers by electrospinning method

One-dimensional ZnAl2O4 and ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers were fabricated by electrospinning method. X-ray diffraction pattern confirmed that the fibers were composed of the cubic ZnAl2O4 phase. Scanning electron microscopy and transmission electron microscopy results indicated that the ZnAl2O4 microfibers annealed at 1000 °C were composed of some smaller nanoparticles and the diameters of the microfibers were in the range of 140–230 nm. Under the excitation of ultraviolet and low-voltage electron beams (3–5 kV), the ZnAl2O4: A3+ (A = Cr, Eu, Tb) samples showed the emission of the host and the doping ions. The evolution of the optical properties of microfibers with increasing the doping concentration was investigated in detail. Green and red emissions can be realized in ZnAl2O4 microfibers by changing the doping ions. The ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers have potential applications in full-color field emission displays.

Different color emission can be realized in one-dimensional ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers fabricated by electronspinning method by changing the doping ions.Figure optionsDownload as PowerPoint slideHighlights
► ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers were obtained by electronspinning method.
► Luminescence properties were due to the transitions of Cr3+, Eu3+ and Tb3+ ions.
► A new band was observed around 600 nm in CL spectra of ZnAl2O4: Cr3+ microfibers.