کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1500971 | 993366 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of SiC particles on the laser sintering of Al–7Si–0.3Mg alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The direct laser sintering of Al–7Si–0.3Mg/SiC composites was studied. It is shown that the densification rate obeys first-order kinetics. The rate constant is found to increase at low SiC fractions but abruptly decreases at >∼5 vol.%. In the presence of ceramic particles, the melt track becomes more stable and a more continuous sintered surface is obtained. Meanwhile, significant reaction occurs between the aluminum melt and the reinforcement particles, leading to formation of Al4SiC4 and silicon particles. The solidification microstructure is also altered.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 59, Issue 2, July 2008, Pages 199–202
Journal: Scripta Materialia - Volume 59, Issue 2, July 2008, Pages 199–202
نویسندگان
A. Simchi, D. Godlinski,