Density–property relationships in mineralized collagen–glycosaminoglycan scaffolds

Mineralized collagen–glycosminoglycan scaffolds have previously been fabricated by freeze-drying a slurry containing a co-precipitate of calcium phosphate, collagen and glycosaminoglycan. The mechanical properties of the scaffold are low (e.g. the dry Young’s modulus for a 50 wt.% mineralized scaffold is roughly 780 kPa). Our previous attempt to increase the mechanical properties of the scaffold by increasing the mineralization (from 50 to 75 wt.%) was unsuccessful due to defects in the more mineralized scaffold. In this paper, we describe a new technique to improve the mechanical properties by increasing the relative density of the scaffolds. The volume fraction of solids in the slurry was increased by vacuum-filtration. The slurry was then freeze-dried in the conventional manner to produce scaffolds with relative densities between 0.045 and 0.187 and pore sizes of about 100–350 μm, values appropriate for bone growth. The uniaxial compressive stress–strain curves of the scaffolds indicated that the Young’s modulus in the dry state increased from 780 to 6500 kPa and that the crushing strength increased from 39 to 275 kPa with increasing relative density. In the hydrated state, the Young’s modulus increased from 6.44 to 34.8 kPa and the crushing strength increased from 0.55 to 2.12 kPa; the properties were further increased by cross-linking. The modulus and strength were well described by models for cellular solids.