کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1503067 | 993445 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Infiltration of graphite preforms with Al–Si eutectic alloy and mercury
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Infiltration of graphite preforms with Al–Si eutectic alloy and mercury Infiltration of graphite preforms with Al–Si eutectic alloy and mercury](/preview/png/1503067.png)
چکیده انگلیسی
Porous isotropic graphite preforms are infiltrated with Al–12 wt.%Si at 680 °C using an applied pressure of between 2 and 8 MPa. Densitometry after infiltration and solidification is then used to deduce the relevant drainage curve. For comparison, the same preforms are also characterized by mercury porosimetry. By comparing the curves obtained from those two measurements using the Brooks–Corey relation, a contact angle of the Al–Si eutectic on graphite of 139° is obtained, in relatively good agreement with literature data.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 56, Issue 11, June 2007, Pages 991–994
Journal: Scripta Materialia - Volume 56, Issue 11, June 2007, Pages 991–994
نویسندگان
J.M. Molina, A. Rodríguez-Guerrero, M. Bahraini, L. Weber, J. Narciso, F. Rodríguez-Reinoso, E. Louis, A. Mortensen,