Ceria associated manganese oxide nanoparticles: Synthesis, characterization and arsenic(V) sorption behavior

Four samples of ceria incorporated manganese oxide (NCMO) were prepared by co-precipitation-calcinations and sol–gel methods, and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, BET surface area etc. The synthetic samples were nanoparticle agglomerates with irregular surface morphology (Ce:Mn = 1:1). The NCMO-1b sample, prepared by the calcination of metal hydroxide at 573 K for 3.0 h, was a nano-crystalline (70–90 nm) and hydrated material having high BET surface area (116.96 m2 g−1). The arsenic(V)-sorption by the samples at pH 7.0 (±0.2) and 30 °C showed that the NCMO-1b is a most efficient material. Optimum pH range for the arsenic(V) sorption is 3.0–7.0 at 303 (±1.0) K. Kinetics and equilibrium data obtained (pH = 7.0 ± 0.2, T = 303 ± 1.0 K and I = 0.01 M) had described the pseudo-second order kinetics and the Freundlich isotherm models well, respectively. Thermodynamics of the sorption reaction showed that the changes of enthalpy (ΔH°), entropy (ΔS°) and Gibbs free energy (ΔG°), respectively, were +23.901 kJ mol−1, +0.175 kJ mol−1 K−1 and −25.737 to −32.753 kJ mol−1 at T = 283–323 K. Estimation of the sorption energy (E = 17.15 kJ mol−1) indicated that the arsenic(V) was chemisorbed on NCMO-1b. The phosphate only reduced the arsenic(V) removal efficiency of NCMO-1b.

► Green chemical method (redox-assisted and sol–gel) for nano-structured ceria supported manganese oxide (NCMO) synthesis.
► Increase of particle size with incineration of redox-assisted NCMO.
► High efficiency of aqueous As(V)-sorption by NCMO.
► As(V)-chemisorption with spontaneous nature and difficult to desorption.
► Phosphate adversely influence the arsenic(V) sorption reaction with NCMO.