Preparation and characterization of the simulated burnup americium-containing uranium–plutonium mixed oxide fuel

In order to investigate the effect on fuel thermophysical properties when adding americium and selected fission products to uranium–plutonium mixed oxide (MOX) fuel, simulated low decontamination MOX fuel with high burn-ups to 250 GWd/t, has been prepared and subjected to characterization tests, elastic moduli measurements and melting temperature measurement. Elastic moduli for the simulated low decontamination MOX fuel were almost the same level as fuel without americium and fission products and decrease in the moduli was slight with increasing simulated burn-up. The melting temperature of high burn-up, low decontamination MOX fuel may be estimated by using the findings on the effect of americium, plutonium addition and fission products accumulation.