Phase constituents of Al-rich U–Mo–Al alloys examined by transmission electron microscopy

To supplement the understanding of diffusional interactions involving Al-rich region of the U–Mo–Al system, alloys with composition 85.7Al–11.44U–2.86Mo and 87.5Al–10U–2.5Mo in at.%, were examined to determine the equilibrium phase constituents at 500 °C. These alloys were triple arc-melted, homogenized at 500 °C for 200 h, and water-quenched to preserve the high temperature microstructure. X-ray diffraction, scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (XEDS), and transmission electron microscopy (TEM) with high angle annular dark field (HAADF) imaging via scanning transmission electron microscopy (STEM) were employed for the characterization. Alloy specimens for TEM/STEM were prepared using site-specific focused ion beam (FIB) in situ lift-out (INLO) technique. Despite the homogenization time and temperature, five different phases, namely fcc-Al solid solution, cubic-UAl3, orthorhombic-UAl4, hexagonal-U6Mo4Al43 and diamond cubic-UMo2Al20, were observed. Based on U–Al, U–Mo and Al–Mo binary phase diagrams, previously proposed U–Mo–Al isotherms, and the solidification microstructure of these alloys, the Al-rich region of the equilibrium ternary isotherm at 500 °C was constructed. The fcc-Al solid solution, orthorhombic-UAl4, and diamond cubic-UMo2Al20 which were determined to be the equilibrium phases in 85.7Al–11.44U–2.86Mo and 87.5Al–10U–2.5Mo alloys.