Dependence of steady-state radiation swelling rate of l 0.1C-16Cr-15Ni-2Mo-2Mn-Ti-Si austenitic steel on dpa rate and irradiation temperature

A large number of swelling measurement data on the 0.1C-16Cr-15Ni-2Mo-2Mn-Ti-Si austenitic steel used as a fuel cladding at temperatures 640-870 К in the BN-600 fast reactor were analyzed. It was found that within irradiation temperatures 690-830 К a steady-state swelling dose rate was from 0.45%/dpa to 1.1%/dpa. By the statistical model of point defect migration for the 0.1C-16Cr-15Ni-2Mo-2Mn-Ti-S steel the dependence of the steady-state swelling rate on the irradiation temperature and displacement rate was calculated. The calculation data were consistent with the experimental data.