Fine structure behaviour of VVER-1000 RPV materials under irradiation

Changes in the fine structure and mechanical properties of the base metal (BM) and weld metal (WM) of VVER-1000 pressure vessels during accumulation of neutron dose in the range of fluences ∼(3.2–15) × 1023 m−2 (E > 0.5 MeV) at 290 °C are studied using methods of transmission electron microscopy, fractographic analysis, and Auger electron spectroscopy. A correlation was found between the changes of mechanical properties and the micro- and nano-structures of the studied steels. Accumulation of neutron dose considerably raises the strength characteristics and transition temperature of VVER-1000 pressure vessel steels. The rate of changes in the mechanical properties of the weld metal is significantly higher than that of the base metal. The slower growth of strength characteristics and transition temperature shift of the base metal under irradiation as compared with the weld metal is due to the slower growth of the density of radiation defects and radiation-induced precipitates. The level of intergranular embrittlement under irradiation in the weld metal is not higher then in the base metal in spite of the higher content of nickel.