The materials test station: A fast-spectrum irradiation facility

The United States Department of Energy is developing technologies needed to reduce the quantity of high-level nuclear waste bound for deep geologic disposal. Central to this mission is the development of high burn-up fuel with significant inclusion of plutonium and minor actinides. Different fuel forms (e.g., nitrides, oxides, and metal matrix) and composition are under study. The success of these cannot be judged until they have been irradiated and tested in a prototypic fast neutron spectrum environment. In 2005, the US Congress authorized funding for the design of the materials test station (MTS) to perform candidate fuels and materials irradiations in a neutron spectrum similar to a fast reactor spectrum. The MTS will use a 1-MW proton beam to generate neutrons through spallation reactions. The peak neutron flux in the irradiation region will exceed 1.2 × 1019 n m−2 s−1 and the fast neutron fluence will reach 2 × 1026 n m−2 per year of operation. Site preparation and test station fabrication are expected to take four years.