کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1578940 | 1001217 | 2010 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The aim of this paper was to address the effects of multiple laser peening and laser peening intensity used in laser shock peening (LSP) on the residual stress, micro-hardness and three-point bending fatigue performance of Ti-6Al-4V alloy. The multiple laser peening was accomplished by using the successive laser shocks at the same spot and the laser peening intensity was changed through changing the number of overlapped laser spots. The microstructure, which was characterized by highly tangled and dense dislocation arrangements due to high strain rate, can be found near the surface of the laser-peened specimen. By comparing with the as-received specimen, high micro-hardness and compressive residual stress were introduced at the surface of the laser-peened specimen. With increasing the number of overlapped laser spots, the fatigue life of the laser-peened specimen increased, reached a local maximum and then decreased. The specimen treated by using three overlapped laser spots exhibited the highest fatigue life. When the number of overlapped laser spots was kept to be three, the LSP treatments with one single laser shock and two successive laser shocks respectively provided a 22.2% and 41.7% increase in the fatigue strength as compared with the as-received specimens.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 527, Issue 15, 15 June 2010, Pages 3411-3415
Journal: Materials Science and Engineering: A - Volume 527, Issue 15, 15 June 2010, Pages 3411-3415
نویسندگان
X.C. Zhang, Y.K. Zhang, J.Z. Lu, F.Z. Xuan, Z.D. Wang, S.T. Tu,