کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1583336 | 1514886 | 2007 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fatigue strength improvement of notched structural steels with work hardening
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this study, the effect of plastic work on the fatigue strength of a structural steel was investigated in detail. Fatigue tests were performed using specimens made of a conventional structural steel, JIS S25C. One set of tests employed monotonically pre-strained specimens with pre-strain ranging from 2% until 8% in tension. In this case, the fatigue limit compared to that for non-pre-strained samples, decreases under small pre-strain and then gradually increases with pre-strain. The increase in the fatigue limit is only 7% relative to that for non-pre-strained specimens for a pre-strain of 8%. The other set of tests employed roller worked specimens with the roller deformation value varying from 0.25 to 1.50Â mm in the diameter direction. In this case, the fatigue limit remarkably increases to about 230% of the original value with increased roller working with the effect gradually saturating and then deteriorated a little, so that there exists an optimum roller working value for improving the fatigue limit. This remarkable increase in fatigue limit is caused by the existence of compressive residual stress, elongated microstructure and work hardening.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volumes 468â470, 15 November 2007, Pages 176-183
Journal: Materials Science and Engineering: A - Volumes 468â470, 15 November 2007, Pages 176-183
نویسندگان
Shin-Ichi Nishida, Congling Zhou, Nobusuke Hattori, Shengwu Wang,