Modelling the electro-osmotically enhanced pressure dewatering of activated sludge

The mechanical dewatering of biological materials, such as activated sludge, is troublesome due to their high compressibility. The dewatering can be improved drastically by the use of electro-osmosis, a technique in which a direct current electric field is applied to the filter cake, inducing an electro-kinetic displacement of the liquid phase. In this article, a model is presented which describes this process for a one-dimensional, one-sided filter press. The model starts from two existing models, each describing a part of the process [Iwata, M., Igami, H., Murase, T., 1991. Analysis of electroosmotic dewatering. Journal of Chemical Engineering of Japan 24(1), 45–50; Sørensen, P.B., Moldrup, P., Hansem, J.A., 1996. Filtration and expression of compressible cakes. Chemical Engineering Science 51(6), 967–979]. A robust solution scheme for the basic flux and continuity equations is used to describe filtration and expression. Regarding the electro-osmosis, an adapted form of the Darcy equation, expressing electro-osmotic induced flow as well as pressure induced flow, is integrated into the former solution scheme. This permits the simulation of the overall process using a single model. Validation of the model revealed that the experimental piston height during dewatering can be described accurately provided that temperature effects are taken into account.