کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1605099 | 1516205 | 2016 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication and mechanical behavior of porous Cu via chemical de-alloying of Cu25Fe75 alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
We report on a study of the synthesis and deformation of bulk porous Cu processed via plasma activated sintering (PAS) of Cu-Fe precursor alloys. The process used in our work involved both low temperature (600-900 °C) and low pressure (50 MPa) followed by chemical de-alloying of Cu-Fe in a solution of 5 wt% H2SO4. Our results show that when this approach is applied to a Cu-75 at.% Fe alloy, de-alloying of the active Fe phase leads to the formation of micron-sized 1-4 μm pores and approximately 73 vol% porosity. Our results show that the microstructure of the porous Cu principally depends on the morphology of the precursor Cu25Fe75. Moreover, studies of the relationship between the microstructure and compressive deformation behavior of porous Cu reveal that the mechanical strength increases with decreasing pore size in the linear elastic and plateau regions, but decreases with decreasing pore size in the densification region. The stress level corresponding to the plateau stage in the range of 16.11-18.11 MPa corresponding to a strain of 30%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 689, 25 December 2016, Pages 6-14
Journal: Journal of Alloys and Compounds - Volume 689, 25 December 2016, Pages 6-14
نویسندگان
Lijie Zou, Fei Chen, Xi Chen, Yaojun Lin, Qiang Shen, Enrique J. Lavernia, Lianmeng Zhang,