کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1606057 | 1516222 | 2016 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Phase precipitation behavior during isothermal deformation in β-quenched near beta titanium alloy Ti-7333
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Evolution of the α phase precipitation behavior and morphologies characteristics during isothermal deformation of a near β titanium alloy Ti-7Mo-3Al-3Nb-3Cr (Ti-7333) have been investigated using Transmission Electron Microscope (TEM) and Electron Backscattered Second Diffraction (EBSD). The results indicated that the fine and random α phase precipitated during the isothermal deformation. The morphologies of α phase precipitation during isothermal deformation are markedly different from those of the α phase during heat treatment. The volume fraction of α phase increases with the increasing of the true strain. Most of α phase precipitates in high-angle grain boundaries (HAGBs) and low-angle grain boundaries (LAGBs), while a small amount of spherical α phase precipitates in the grains. The crystallographic orientation of the spheroidal α phase is approximate where precipitate most in LAGBs and grains, otherwise different orientation relationship will be presented when the precipitation in grain boundaries (GBs). The α phase precipitation during isothermal deformation were affected by amount of dislocations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 671, 25 June 2016, Pages 381-388
Journal: Journal of Alloys and Compounds - Volume 671, 25 June 2016, Pages 381-388
نویسندگان
Ke Hua, Jinshan Li, Hongchao Kou, Jiangkun Fan, Miao Sun, Bin Tang,