کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1606466 | 1516227 | 2016 | 8 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process](/preview/png/1606466.png)
• Coercivity of hot-deformed Nd-Fe-B magnets is enhanced by the infiltration of various R-TM eutectic alloys.
• The sample infiltrated with Nd90Al10 shows the highest coercivity of 2.5 T at room temperature.
• At 200 °C, Nd70Cu30 diffusion-processed sample possesses the highest coercivity of 0.7 T.
Nd-M (M = Al, Cu, Ga, Zn, Mn) alloys with compositions close to eutectic points were investigated as diffusion sources for the grain boundary diffusion process to hot-deformed Nd-Fe-B magnets. Coercivity enhancement was observed for most of the alloys. Among them, the sample processed with Nd90Al10 exhibited the highest coercivity of 2.5 T at room temperature. However, the sample processed with Nd70Cu30 exhibited the highest coercivity of 0.7 T at 200 °C. Microstructural observations using scanning transmission electron microscope (STEM) showed that nonferromagnetic Nd-rich intergranular phase envelops the Nd2Fe14B grains after the diffusion process. Abnormal grain growth and the dissolution of Al into the Nd2Fe14B grains were observed in the sample processed with Nd90Al10, which explains its inferior thermal stability of coercivity compared to the sample processed with Nd70Cu30. The coercivity enhancement and poor thermal stability of the coercivity of the Nd90Al10 diffusion-processed sample are discussed based on microstructure studies by transmission electron microscopy.
Journal: Journal of Alloys and Compounds - Volume 666, 5 May 2016, Pages 432–439