کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1606486 | 1516225 | 2016 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Adiabatic temperature change of micro- and nanocrystalline Y2Fe17 heat-exchangers for magnetic cooling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Magnetic refrigerants are used as heat exchangers to provide rapid heat transfer between magnetocaloric materials and heat-transfer liquid. An important question is how to turn bulk magnetocaloric materials into porous structures with superior heat transfer properties and cooling performance. We discuss two methods for assembling Y2Fe17 rapidly quenched ribbons into heat exchangers of desired geometry - stacked 100 μm thick plates with 100 μm gaps: the first method consists in gluing rapidly quenched ribbons using thermoconductive epoxy; the second is sintering stacked ribbons at a temperature of 30 K below the melting point of the Y2Fe17 phase. These approaches are promising with regards to making near-net shaped magnetic refrigerants. We report on adiabatic temperature change ÎTad, magnetic entropy change ÎSm and thermal conductivity λ of rapidly quenched Y2Fe17 ribbons, obtained at different quenching rates. A direct correlation between the lattice parameters of the Y2Fe17, ÎTad and ÎSm in rapidly quenched samples is observed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 668, 25 May 2016, Pages 40-45
Journal: Journal of Alloys and Compounds - Volume 668, 25 May 2016, Pages 40-45
نویسندگان
D. Yu Karpenkov, K.P. Skokov, J. Liu, A. Yu Karpenkov, E.M. Semenova, E.L. Airiyan, Yu G. Pastushenkov, O. Gutfleisch,