کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1608387 | 1516248 | 2015 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Nitriding of a high entropy FeNiMnAlCr alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The as-cast, two-phase, f.c.c. + B2, lamellar-structured, high-entropy alloy Fe28.2Ni18.8Mn32.9Al14.1Cr6 was annealed in pure nitrogen at either 800 °C or 1000 °C for 100 h in order to harden the surface by nitridation. Similar nitriding treatments were performed on a comparably-structured, four-component alloy Fe30Ni20Mn35Al15 for comparison. Scanning electron microscopy and energy dispersive X-ray spectroscopy were used to analyze the resulting microstructures and phase compositions. AlN formation near the surface completely depleted the matrix of Al resulting in a f.c.c. matrix containing AlN particles, while a two-phase lamellae structure remained in the center of the specimens. Nevertheless, the AlN-containing region exhibited a higher hardness than the AlN-free area. Interestingly, the presence of Cr led to much more rapid diffusion of nitrogen into the material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 645, 5 October 2015, Pages 376-381
Journal: Journal of Alloys and Compounds - Volume 645, 5 October 2015, Pages 376-381
نویسندگان
Fanling Meng, Ian Baker,