Formation of local nanocrystalline structure in a boron steel induced by electropulsing

Nanocrystalline γ-Fe was obtained locally in a cold-rolled boron steel as a result of transient high-energy electropulsing. The nano-grains of γ-Fe were uniformly about 15 nm in size. No phases other than γ-Fe have been found in the nanocrystalline structure. It is believed that the pulse current enhances the nucleation rate of γ-Fe phase during the phase transformation from α-Fe to γ-Fe, resulting in the formation of local nanostructure. Moreover, in this study the steel consisting of the lath martensitic and the γ-Fe nanocrystalline structure exhibits high mechanical properties.

► The local NC structures in the uniform size of ∼15 nm were obtained by electropulsing.
► The NC structures were made up of γ-Fe without any other phases coexisting.
► The reduction in nucleation barrier of the γ-Fe helped form the local γ-Fe NC structure.
► The steel consisting of the lath martensitic and the γ-Fe nanocrystalline structure exhibits high mechanical properties.