کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1619074 | 1516384 | 2010 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Characterization of as-deposited and annealed Cr–C alloy coatings produced from a trivalent chromium bath Characterization of as-deposited and annealed Cr–C alloy coatings produced from a trivalent chromium bath](/preview/png/1619074.png)
Amorphous Cr–C alloy coatings were electrodeposited from a trivalent chromium bath containing formic acid. The effects of plating parameters such as pH and current density on composition, structure, morphology and corrosion behaviour of as-deposited coatings were investigated. Results showed that the suitable current density for Cr–C alloy electrodeposition is increased as the pH is decreased. Furthermore, by decreasing the pH, higher amount of carbon was introduced into the coatings. The Cr–C alloy coatings deposited at lower pH showed higher passive current density on Tafel plot. By annealing the amorphous Cr–C alloy coatings at 300 °C, a nanocrystalline structure having higher hardness was obtained. However, the corrosion resistance was seen to be impaired. Annealing at 600 °C led to the precipitation of Cr23C6 which resulted in a higher hardness. The formation of Cr23C6 enhanced the corrosion resistance of coatings due to an increase in corrosion potential. However, formation of micro-cells between the Cr23C6 precipitates and bulk chromium prevented the passive film formation.
Journal: Journal of Alloys and Compounds - Volume 496, Issues 1–2, 30 April 2010, Pages 164–168